(a) Pre-stressed Concrete Beams: T-Beam Floor & Flat Beam Floor
(b) Rapid Precast Fences
(c) Paving Blocks (Cabros)
(d)Ready Mix Concrete
(e) Building and Construction services
We have High Tensile Steel Tendons (commonly known as PC Wire).
- Suspended Foundation
-Zero Excavation
-Zero Backfilling
-Faster Construction
-Ideal for cotton/clay soil and sloped landscape
- Saving on concrete.
- Saving on steel
- Zero trappers.
- Shorter formwork(Flat Beam), installation and curing time.
- Flat and even surface ceiling.
- Sound and Heat proof slab
- Longer spans and higher live load capacity
- Lower dead weight
- You share your building drawing with us and we work out a quote for it.
- We do site visits to take actual measurements once the building has reached the lintel level.
We provide a technician to work with your construction workers to do the installation.
This also offers an opportunity for sharing the know-how to other construction workers.
We provide a technician, as such you only need unskilled labourers to support the process.
No these blocks are only for slab and flat roof buildings only.
The prestressed beams are cut at our site specifically for your site based on drawings or measurements taken during site visit.
We encourage site visits to take actual measurements as once the beams are cut they must be accurate to fit in the building.
No. Once the prestressed beams and hollow blocks are installed you add BRC mesh and no additional steel on the slab.
Yes. The prestressed beams and hollow blocks have been used for ages to construct highrise buildings.Indeed this type of slab is ideal as it is strong, durable and light thus ideal for multi-storey buildings.
We recommend BRC A142
The beams are made with 6 high tension steel tendons that are tensioned before concrete is applied.
The technology requires 50% lesser formwork with spacing of maximum 1metre between the 3by2.
Our technical team during site visits guides the construction crew (fundis) on how to do the formwork.
The slab curing 14 days, after which the timber formwork on Flat Beam Floor can be removed.
Once the prestressed beams and hollow blocks are installed, the electrical and plumbing work is done before BRC is installed.
We offer transport and in addition have a pool of transport contractors who are able to ferry the goods to your site. We welcome clients who have their own transport to collect the goods from our facilities.
We have our Head Office at North Park Hub, Eastern Bypass-Kiambu, Sales office at Marurui, Northern Bypass Nairobi and a Sales Office in Mombasa
Yes. We have on-going sites regularly across Kenya and are happy to organize for clients to pay a visit to such or completed ones.
-We do site visit and confirm the measurements
-We issue a quote
-You confirm the sale by paying into our account 50% of the quote
-For FBF -Within (2) two days we deliver the materials to your site
-For TBF- within (15) fifteen days we deliver the materials to your site
-The 50% balance is duly cleared
-Installation technician is deployed
NB: For clients collecting materials from our site, the balance must be fully cleared before collection.
NB: We manufacture the beams at 100metres length and are only cut according to site measure specific to individual sites hence the requirement for a 50% deposit before we cut the beams at our factory.
-Basic Timber Formwork
-Lintel Beam steel work
-Installation of beams and blocks
-Mechanical works (Plumbing and Electrical works)
-BRC Mesh installation
-50mm Concrete casting
NB: The lintel (ring) beam is cast together with the slab.
-The Lintel needs to have been cast.
-Installation of T-Beam & Blocks
-Mechanical Works (Plumbing and Electrical)
-50MM concrete cover with Fiber Mesh
-We source only quality materials from pre-approved suppliers.
-We regularly have our products tested internally and with external testing services providers e.g. JKUAT
-We provide samples and cube tests to clients for independent testing.